Palladium nanoparticles: Toxicological effects and potential implications for occupational risk assessment

The increasing technological applications of palladium nanoparticles (Pd-NPs) and their consequent enhancing release into the community and occupational environments, have raised public health concerns regarding possible adverse effects for exposed subjects, and particularly for workers chronically and highly exposed to these materials, whose toxico-kinetic and dynamic behavior remains to be fully understood. Therefore, this review aimed to critically analyze literature data to achieve a more comprehensive knowledge on the toxicological profile of Pd-NPs. Results from available studies demonstrated the potential for these chemicals to affect the ecosystem function, to exert cytotoxic and pro-inflammatory effects in vitro as well as to induce early alterations in different target organs in in vivo models. However, our revision pointed out the need for future studies aimed to clarify the role of the NP physico-chemical properties in determining their toxicological behavior, as well as the importance to carry out investigations focused on environmental and biological monitoring to verify and validate experimental biomarkers of exposure and early effect in real exposure contexts. Overall, this may be helpful to support the definition of suitable strategies for the assessment, communication and management of Pd-NP occupational risks to protect the health and safety of workers

Toxicological effects of titanium dioxide nanoparticles: a review of in vivo studies

The essence of nanotechnology is the production of nanoparticles (NPs) with unique physicochemical properties allowing worldwide application in new structures, materials, and devices. The consequently increasing human exposure to NPs has raised concerns regarding their health and safety profiles. Titanium dioxide (TiO2) has been reported to induce adverse pulmonary responses in exposed animals. However, the potential more dangerous biological activities of TiO2NPs compared to their fine-sized counterparts are not fully understood. Therefore, this work is aimed to provide a comprehensive evaluation of the toxic effects induced by TiO2NPs inin vivoexperiments. It is intended to deeply understand the toxicological behaviour of TiO2NPs and to predict potential human health effects. Moreover, it may be an instrument to extrapolate relevant data for human risk evaluation and management and to identify those critical aspects that deserve great attention in future population and epidemiologic research

Artificial Stone Associated Silicosis: A Systematic Review

Silicosis is a progressive fibrotic lung disease that is caused by the inhalation of respirable crystalline silica. Due to its high silica content, artificial stone (AS) can become a possible source of hazardous dust exposure for workers that are employed in the manufacturing, finishing, and installing of AS countertops. Therefore, the aim of this review was to verify the association between AS derived silica exposure and silicosis development, and also then define the pathological characteristics of the disease in relation to specific work practices and preventive and protective measures that were adopted in the workplace. A systematic review of articles available on Pubmed, Scopus, and Isi Web of Knowledge databases was performed. Although the characteristics of AS-associated silicosis were comparable to those that were reported for the disease in traditional silica exposure settings, some critical issues emerged concerning the general lack of suitable strategies for assessing/managing silica risks in these innovative occupational fields. Further research that is designed to assess the hazardous properties of AS dusts, levels of exposure in workplaces, and the effectiveness of protective equipment appears to be needed to increase awareness concerning AS risks and induce employers, employees, and all factory figures that are engaged in prevention to take action to define/adopt proper measures to protect the health of exposed workers

Impact of Shift Work and Long Working Hours on Worker Cognitive Functions: Current Evidence and Future Research Needs

Particular working conditions and/or organization of working time may cause important sleep disturbances that have been proposed to be predictive of cognitive decline. In this regard, circadian rhythm misalignment induced by exposure to night work or long working hours would be responsible for cognitive impairment. Nevertheless, evidence supporting this correlation is limited and several issues still need to be elucidated. In this regard, we conducted a systematic review to evaluate the association between shift/night work and cognitive impairment and address its main determinants. Information provided by the reviewed studies suggested that night work might have serious immediate negative effects especially on cognitive domains related to attention, memory and response inhibition. Furthermore, cognitive performance would progressively worsen over consecutive night shifts or following exposure to very long work shifts. Otherwise, conflicting results emerged regarding the possible etiological role that night work chronic exposure would have on cognitive impairment. Therefore, circadian rhythm desynchronization, lack of sleep and fatigue resulting from night work may negatively impact worker's cognitive efficiency. However, in light of the considerable methodological variability of the reviewed studies, we proposed to develop a standardized research and evaluation strategy in order to obtain a better and comprehensive understanding of this topic

Opportunities and challenges of nanotechnology in the green economy

In a world of finite resources and ecosystem capacity, the prevailing model of economic growth, founded on ever-increasing consumption of resources and emission pollutants, cannot be sustained any longer. In this context, the "green economy" concept has offered the opportunity to change the way that society manages the interaction of the environmental and economic domains. To enable society to build and sustain a green economy, the associated concept of "green nanotechnology" aims to exploit nano-innovations in materials science and engineering to generate products and processes that are energy efficient as well as economically and environmentally sustainable. These applications are expected to impact a large range of economic sectors, such as energy production and storage, clean up-technologies, as well as construction and related infrastructure industries. These solutions may offer the opportunities to reduce pressure on raw materials trading on renewable energy, to improve power delivery systems to be more reliable, efficient and safe as well as to use unconventional water sources or nano-enabled construction products therefore providing better ecosystem and livelihood conditions.However, the benefits of incorporating nanomaterials in green products and processes may bring challenges with them for environmental, health and safety risks, ethical and social issues, as well as uncertainty concerning market and consumer acceptance. Therefore, our aim is to examine the relationships among guiding principles for a green economy and opportunities for introducing nano-applications in this field as well as to critically analyze their practical challenges, especially related to the impact that they may have on the health and safety of workers involved in this innovative sector. These are principally due to the not fully known nanomaterial hazardous properties, as well as to the difficulties in characterizing exposure and defining emerging risks for the workforce. Interestingly, this review proposes action strategies for the assessment, management and communication of risks aimed to precautionary adopt preventive measures including formation and training of employees, collective and personal protective equipment, health surveillance programs to protect the health and safety of nano-workers. It finally underlines the importance that occupational health considerations will have on achieving an effectively sustainable development of nanotechnology

HBM4EU chromates study - the measurement of hexavalent and trivalent chromium in exhaled breath condensate samples from occupationally exposed workers across Europe

The aim of this study was to investigate the practicability of exhaled breath condensate (EBC) as a biological matrix to detect and measure hexavalent chromium (Cr(VI)) and trivalent chromium (Cr(III)) in workers occupationally exposed to Cr(VI). EBC samples were collected from workers in France, Finland, Italy, The Netherlands and the United Kingdom from three different target activities: chrome platers, stainless steel welders and surface treatment workers. Pre and post working week EBC samples were collected from 177 exposed workers and 98 unexposed workers (control group). Hyphenated chromatography systems with inductively coupled plasma - mass spectrometry (ICP-MS) were for the analysis. The results showed that the occupationally exposed workers had significantly higher levels of Cr(VI) and Cr(III) than the control group. Chrome platers exhibited the highest Cr(VI) levels in their EBC samples, with a significant increase from their pre to post samples for both Cr(VI) and Cr(III). A significant difference was also found between pre and post EBC samples for Cr(III) in welders. This study has shown that EBC has the potential to be a valid, non-invasive biological matrix to assess occupational exposure to Cr(VI) and Cr(III) for biological monitoring assessment, with the ability to detect low level inhalation exposures.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 733032 and received co-funding from the author’s organizations and/or Ministries.S

reflection and lessons learnt from designing and undertaking a collaborative European biomonitoring study on occupational exposure to hexavalent chromium

The EU human biomonitoring initiative, HBM4EU, aims to co-ordinate and advance human biomonitoring (HBM) across Europe. As part of HBM4EU, we presented a protocol for a multicentre study to characterize occupational exposure to hexavalent chromium (Cr(VI)) in nine European countries (HBM4EU chromates study). This study intended to collect data on current occupational exposure and to test new indicators for chromium (Cr) biomonitoring (Cr(VI) in exhaled breath condensate and Cr in red blood cells), in addition to traditional urinary total Cr analyses. Also, data from occupational hygiene samples and biomarkers of early biological effects, including genetic and epigenetic effects, was obtained, complementing the biomonitoring information. Data collection and analysis was completed, with the project findings being made separately available. As HBM4EU prepares to embark on further European wide biomonitoring studies, we considered it important to reflect on the experiences gained through our harmonised approach. Several practical aspects are highlighted for improvement in future studies, e.g., more thorough/earlier training on the implementation of standard operating procedures for field researchers, training on the use of the data entry template, as well as improved company communications. The HBM4EU chromates study team considered that the study had successfully demonstrated the feasibility of conducting a harmonised multicentre investigation able to achieve the research aims and objectives. This was largely attributable to the engaged multidisciplinary network, committed to deliver clearly understood goals. Such networks take time and investment to develop, but are priceless in terms of their ability to deliver and facilitate knowledge sharing and collaboration.publishersversionpublishe

HBM4EU chromates study - Reflection and lessons learnt from designing and undertaking a collaborative European biomonitoring study on occupational exposure to hexavalent chromium

Multicenter StudyThe EU human biomonitoring initiative, HBM4EU, aims to co-ordinate and advance human biomonitoring (HBM) across Europe. As part of HBM4EU, we presented a protocol for a multicentre study to characterize occupational exposure to hexavalent chromium (Cr(VI)) in nine European countries (HBM4EU chromates study). This study intended to collect data on current occupational exposure and to test new indicators for chromium (Cr) biomonitoring (Cr(VI) in exhaled breath condensate and Cr in red blood cells), in addition to traditional urinary total Cr analyses. Also, data from occupational hygiene samples and biomarkers of early biological effects, including genetic and epigenetic effects, was obtained, complementing the biomonitoring information. Data collection and analysis was completed, with the project findings being made separately available. As HBM4EU prepares to embark on further European wide biomonitoring studies, we considered it important to reflect on the experiences gained through our harmonised approach. Several practical aspects are highlighted for improvement in future studies, e.g., more thorough/earlier training on the implementation of standard operating procedures for field researchers, training on the use of the data entry template, as well as improved company communications. The HBM4EU chromates study team considered that the study had successfully demonstrated the feasibility of conducting a harmonised multicentre investigation able to achieve the research aims and objectives. This was largely attributable to the engaged multidisciplinary network, committed to deliver clearly understood goals. Such networks take time and investment to develop, but are priceless in terms of their ability to deliver and facilitate knowledge sharing and collaboration.Highlights: Feasibility of conducting harmonised Pan-European biomonitoring study on occupational exposure demonstrated; Developing a successful network and implementation of systematic methodology takes significant dedication from all involved; Methodological improvements were identified which will benefit future large-scale occupational biomonitoring campaigns; Developed multicentre network allows and promotes further opportunities for future research, knowledge sharing and collaboration; Data produced supports science to policy interface in the scope of REACH and occupational safety and health regulations.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 733032 and received co-funding from the author’s organizations and/or Ministries.info:eu-repo/semantics/publishedVersio

usefulness of measurement of blood chromium levels in the assessment of occupational Cr(VI) exposure

Funding Information: This work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. Luxembourg entered the study at a later stage and thus financed the study at its own means. Publisher Copyright: © 2022 The AuthorsOccupational exposures to hexavalent Chromium (Cr(VI)) can occur in welding, hot working stainless steel processing, chrome plating, spray painting and coating activities. Recently, within the human biomonitoring for Europe initiative (HBM4EU), a study was performed to assess the suitability of different biomarkers to assess the exposure to Cr(VI) in various job tasks. Blood-based biomarkers may prove useful when more specific information on systemic and intracellular bioavailability is necessary. To this aim, concentrations of Cr in red blood cells (RBC-Cr) and in plasma (P–Cr) were analyzed in 345 Cr(VI) exposed workers and 175 controls to understand how these biomarkers may be affected by variable levels of exposure and job procedures. Compared to controls, significantly higher RBC-Cr levels were observed in bath plating and paint application workers, but not in welders, while all the 3 groups had significantly greater P–Cr concentrations. RBC-Cr and P–Cr in chrome platers showed a high correlation with Cr(VI) in inhalable dust, outside respiratory protective equipment (RPE), while such correlation could not be determined in welders. In platers, the use of RPE had a significant impact on the relationship between blood biomarkers and Cr(VI) in inhalable and respirable dust. Low correlations between P–Cr and RBC-Cr may reflect a difference in kinetics. This study showed that Cr-blood-based biomarkers can provide information on how workplace exposure translates into systemic availability of Cr(III) (extracellular, P–Cr) and Cr(VI) (intracellular, RBC-Cr). Further studies are needed to fully appreciate their use in an occupational health and safety context.publishersversionpublishe